CVE-2026-93164
UnknownSummary
A vulnerability in the Linux kernel's uprobes mechanism on x86 has been fixed. Optimized uprobes could clobber the user stack redzone area because the call instruction stored a return address on the stack while user code might keep temporary data there without adjusting rsp. The fix moves optimized uprobes from the nop5 to the nop10 instruction, allowing an additional lea instruction to adjust rsp before the call.
Risk Assessment
The vulnerability can corrupt temporary data in a user process's stack redzone, causing application misbehavior or potential crashes. In environments using uprobes (e.g., eBPF tooling, profiling, tracing), this may lead to unpredictable errors or destabilization of monitored processes.
Recommendation
Update the Linux kernel to a version containing the fix for CVE-2026-93164. After updating, verify that uprobes-based tooling (eBPF, perf, USDT) works correctly and confirm that uprobes syscalls return -EPROTO, indicating the fixed kernel is in place.
Other vulnerabilities in Linux kernel
See all- CVE-2026-98162Unknown
In the Linux kernel, the smb2_tree_connect() function of the SMB server (ksmbd) leaks a tree connection. When ksmbd_iov_pin_rsp() fails, the newly created tree connection is not disconnected, leading to a resource leak.
- CVE-2026-98161Unknown
In the Linux kernel, the nvdimm (pmem) pmem_submit_bio() function records a REQ_PREFLUSH error but continues to copy bio data and can later overwrite the error with a successful REQ_FUA flush. This allows data writes to run after a failed preflush and can complete the bio successfully despite the failed ordering barrier.
- CVE-2026-98160Unknown
In the Linux kernel, the staging rtl8723bs driver's rtw_sdio_if1_init() function frees padapter->HalData with kfree(), even though it was allocated via vzalloc(). Using kfree() to release a vmalloc-backed buffer can lead to memory corruption.
- CVE-2026-100079Unknown
In the Linux kernel, the USB Type-C (ucsi) subsystem's ucsi_register() creates per-instance debugfs entries, but ucsi_unregister() keeps them until ucsi_destroy(). Drivers like ucsi_glink that unregister/register the same UCSI instance across remoteproc restart then try to create an already existing debugfs directory.
- CVE-2026-100078Unknown
In the Linux kernel, the iwlwifi (mei) driver's iwl_mei_write_cyclic_buf() function receives an incorrect first argument — the q_head pointer is passed instead of cldev. The bug has been fixed.
- CVE-2026-100077Unknown
In the Linux kernel, the drm/msm driver does not safely retire a hung submit before GPU recovery completes. Retiring the submit triggers BO free, which can result in GPU pagefaults since the GPU may be actively accessing those BOs.
- CVE-2026-100074Unknown
In the Linux kernel, a bug was fixed where the BPF_REFCOUNT field was not marked as unique, although it should be. The fix addresses this oversight.
- CVE-2026-100073Unknown
In the Linux kernel, a bug in the ext4 filesystem related to transaction overflow during writeback was fixed. A previous fix was too eager in reducing reserved transaction credits, leading to insufficient reservation in some corner cases. The fix uses ext4_meta_trans_blocks() for a correct upper bound estimate.
- CVE-2026-100072Unknown
In the Linux kernel, a problem in the ACPI subsystem was fixed where the use of acpi_get_first_physical_node() in acpi_platform_fill_resource() and acpi_create_platform_device() was unsafe because the returned device could be freed at any time. The fix replaces it with acpi_bus_get_primary_device() and adjusts the code to call it only once.
- CVE-2026-100071Unknown
In the Linux kernel, a memory leak in the HSR (High-availability Seamless Redundancy) module was fixed. When hsr_dev_finalize() fails after registering an RX handler, dynamic nodes learned in that window are not released. The fix frees both dynamic databases in the error unwind path.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %rsp call tramp Note the lea instruction is used to adjust the rsp register without changing the flags. We use nop10 and following transformation to optimized instructions above and back as suggested by Peterz [2]. Optimize path (int3_update_optimize): 1) Initial state after set_swbp() installed the uprobe: cc 2e 0f 1f 84 00 00 00 00 00 From offset 0 this is INT3 followed by the tail of the original 10-byte NOP. After a previous unoptimization bytes 5..9 may still contain the old call instruction, which remains valid for threads already there. 2) Rewrite the LEA tail and call displacement: cc [8d 64 24 80 e8 d0 d1 d2 d3] From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not executable entry points while byte 0 is trapped. 3) Publish the first LEA byte: [48] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this is: lea -0x80(%rsp), %rsp call <uprobe-trampoline> Unoptimize path (int3_update_unoptimize): 1) Initial optimized state: 48 8d 64 24 80 e8 d0 d1 d2 d3 Same as 3) above. 2) Trap new entries before restoring the NOP bytes: [cc] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this traps. A thread that had already executed the LEA can still reach the intact CALL at offset 5. 3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped and byte 5 as CALL. cc [2e 0f 1f 84] e8 d0 d1 d2 d3 From offset 0 this still traps. Offset 5 is still the CALL for any thread that was already past the first LEA byte. 4) Publish the first byte of the original NOP: [66] 2e 0f 1f 84 e8 d0 d1 d2 d3 From offset 0 this is the restored 10-byte NOP; the CALL opcode and displacement are now only NOP operands. Offset 5 still decodes as CALL for a thread that was already there. Tthere is only a single target uprobe-trampoline for the given nop10 instruction address, so the CALL instruction will not be changed across unoptimization/optimization cycles. Therefore, any task that is preempted at the CALL instruction is guaranteed to observe that CALL and not anything else. Note as explained in [2] we need to use following nop10: PF1 PF2 ESC NOPL MOD SIB DISP32 NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1) which means we need to allow 0x2e prefix which maps to INAT_PFX_CS attribute in is_prefix_bad function. Also changing the uprobe syscall error when called out of uprobe trampoline to -EPROTO, so we are able to detect the fixed kernel. The optimized uprobe performance stays the same: uprobe-nop : 3.129 ± 0.013M/s uprobe-push : 3.045 ± 0.006M/s uprobe-ret : 1.095 ± 0.004M/s --> uprobe-nop10 : 7.170 ± 0.020M/s uretprobe-nop : 2.143 ± 0.021M/s uretprobe-push : 2.090 ± 0.000M/s uretprobe-ret : 0.942 ± 0.000M/s --> uretprobe-nop10: 3.381 ± 0.003M/s usdt-nop : 3.245 ± 0.004M/s --> usdt-nop10 : 7.256 ± 0.023M/s [1] https://lore.kernel.org/bpf/[email protected]/ [2] https://lore.kernel.org/bpf/[email protected]/#t
Vulnerability data from NVD (NIST) · CISA KEV · EPSS