CVE-2026-90413
CriticalCVSS 9.1Exploitation Probability (EPSS)
Elevated risk56th percentile - higher than 56% of all known CVEs
Summary
A vulnerability in the Linux kernel's IB/isert (iSER) module allows an unauthenticated initiator to declare more data in a login PDU than was actually sent. This leads to an out-of-bounds read before authentication, potentially causing information disclosure or a system crash.
Risk Assessment
The risk includes potential kernel memory disclosure and denial of service via system panic, exploitable by a remote unauthenticated attacker, leading to service disruption.
Recommendation
Apply the official Linux kernel patch that rejects login PDUs declaring more data than received. Update the system to a patched kernel version immediately.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99270Unknown
A use-after-free (UAF) vulnerability exists in the Linux kernel's reqsk_timer_handler() function. When TCP socket migration fails at inet_ehash_insert(), the code jumps to the no_ownership label and immediately frees the new reqsk via __reqsk_free() without stopping its timer, potentially leading to a UAF.
- CVE-2026-99269Unknown
In the Linux kernel sched_ext scheduler, a task can be found on a non-local DSQ while the CPU that dispatched it is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING. The DSQ consume and move paths don't wait for dispatch to finish and can operate on the task concurrently with the dispatcher. The fix adds scx_wait_dispatching() before operating on the task.
- CVE-2026-99268Unknown
In io_uring with IORING_SETUP_DEFER_TASKRUN, completions are queued as local work and only become CQEs when the submitter enters the kernel to wait for events. io_uring_poll() reports EPOLLIN if local work is pending, but only if the work exists at call time; after DEFER_TASKRUN was added, the ->poll_wq wakeup was replaced by directly waking the submitter, so poll() can sleep despite pending work. The fix wakes ->poll_wq when the first entry is put on the work list, using an RCU callback when needed.
- CVE-2026-99267Unknown
In io_uring NAPI with dynamic tracking, a NAPI id not seen for a minute should be dropped from the ring's busy-poll list. However, the timeout is computed incorrectly — SEC_CONVERSION is used instead of the number of jiffies per second, giving about eight years for HZ=1000 and overflowing on 32-bit systems. As a result, entries are never removed and every wait polls all historical ids.
- CVE-2026-99266Unknown
In io_uring zcrx, io_zcrx_queue_cqe() computes the buffer offset in its area from net_iov_idx(), which is an unsigned int, so the shift is done in 32 bits and only the result is widened to the u64 placed in the CQE. An area can be up to 1 TB, so for every niov beyond the first 4 GB the CQE points the application at a buffer 4 GB (or a multiple) below the correct one. The application reads wrong data and returns a buffer it doesn't own via the refill queue while the real one is never given back.
- CVE-2026-99265Unknown
In io_uring/openclose, io_pipe_fixed() installs both ends of the pipe in the fixed file table, drops ->uring_lock, and copies the slot numbers to the application. If that faults, it takes the lock again and removes whatever is in these slots. If the request is run by io-wq, the lock really is dropped and the slots are visible to others; by the time the error path gets to them, they may have been closed and reused (by IORING_OP_CLOSE, direct open/accept, or IORING_REGISTER_FILES_UPDATE), causing removal of a file unrelated to the failed request. The fix performs the copy with the lock held.
- CVE-2026-99264Unknown
A bug was fixed in the Linux kernel's io_uring/net handling of recv retries on uncommitted buffers. When a receive was retried after a partial transfer, the kernel could hand out buffer memory that the retried request was still writing to, causing data overwrites. The request is now completed with the bytes received instead of retried, and MSG_WAITALL is no longer honoured for incremental buffers or multi-buffer bundles.
- CVE-2026-99263Unknown
In io_uring/poll, if a wakeup sets IO_POLL_RETRY_FLAG between the owning task consuming the existing instance of IO_POLL_RETRY_FLAG and the loop check in io_poll_check_events(), request processing stalls until an unrelated wakeup arrives. The fix uses atomic_cmpxchg instead of atomic_sub_return to guarantee both the count v and poll_refs are 0 and no wakeups are missed.
- CVE-2026-99262Unknown
In io_uring/timeout, an IORING_OP_TIMEOUT run by io-wq due to IOSQE_ASYNC has the same problem as poll, futex, and waitid. io_wq_submit_work() checks IO_WQ_WORK_CANCEL only once before issuing the request; a cancel in between flags the work, gets -EALREADY, and searches ->timeout_list in vain while the worker adds the request and starts the timer. Nobody checks the flag again and the timeout runs its course, and at ring exit a task can get stuck for the full duration. The fix checks the flag under ->timeout_lock and fails the request if set.
- CVE-2026-99261Unknown
In the drm/amdgpu driver, reservation fence slot allocation for eviction of userq per-vm BOs has been corrected. The fix addresses both the move overflow and the eviction fence add for these buffers.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

